15515673159
China S22-M Oil-Immersed Transformer 35kV 2500KVA - High-Quality Power Transmission from Trusted Suppliers and Factory
Product Application
Application of High Magnetic Flux Oriented Silicon Steel Sheets
The core magnetic path of the transformer is made of high magnetic permeability oriented silicon steel sheets. Compared with traditional silicon steel sheets, its magnetic permeability is increased by more than 15%, and the iron loss value is reduced by 20% to 30%. This material is processed through a special grain orientation optimization process, which makes the magnetic domains more orderly, effectively reducing the hysteresis loss and eddy current loss during the alternating magnetic field process.
Selection of Environmental-Friendly Insulating Materials
The transformer is equipped with environmentally friendly insulating oil and insulating paper. The insulating oil is made of natural esters or synthetic esters, which are environmentally friendly. Compared to traditional mineral insulating oil, it is biodegradable and will not cause pollution to the soil or water sources if it leaks, thus conforming to the concept of green power development.
High-Strength Metal Structural Components
The structural components such as transformer oil tanks and clamps are made of high-strength cold-rolled steel plates. They are formed through CNC stamping and welding. The yield strength of the material reaches over 345 MPa. Compared with ordinary steel plates, the anti-deformation ability has been enhanced by 40%, effectively resisting external force impacts during transportation and installation.
Full Inclined Joint Stacking Process of the Core
The transformer core adopts the full inclined joint stacking process. Compared with the traditional direct joint process, the magnetic resistance at the joint is reduced by more than 60%, effectively reducing the leakage magnetic loss and noise at the joint. During the stacking process, a special positioning tool is used to ensure the flatness and verticality of the core laminations, and the gap between the laminations is controlled within 0.05mm, ensuring uniform magnetic permeability of the core.
Product Specifications
| Rated Capacity (KVA) | Connection Group Label | Voltage Combination (KV) | No-Load Current (%) | Load Loss (T) | No-Load Loss (T) | Short Circuit Impedance (%) | |||
| (H.V.) | Tapping Range | (L.V.) | DY | Yy | |||||
| 30 | Yyn0 Dyn11 |
10 6.3 6 |
±5% ±2×2.5% |
0.4 | 1.5 | 505 | 480 | 80 | 4.0 |
| 50 | 1.3 | 730 | 695 | 100 | |||||
| 63 | 1.2 | 870 | 830 | 110 | |||||
| 80 | 1.2 | 1050 | 1000 | 130 | |||||
| 100 | 1.1 | 1265 | 1200 | 150 | |||||
| 125 | 1.1 | 1510 | 1440 | 170 | |||||
| 160 | 1.0 | 1850 | 1760 | 200 | |||||
| 200 | 1.0 | 2185 | 2080 | 240 | |||||
| 250 | 0.9 | 2560 | 2440 | 290 | |||||
| 315 | 0.9 | 3065 | 2920 | 340 | |||||
| 400 | 0.8 | 3615 | 3440 | 410 | |||||
| 500 | 0.8 | 4330 | 4120 | 480 | |||||
| 630 | 0.6 | 4960 | 4960 | 570 | 4.5 | ||||
| 800 | 0.6 | 6000 | 6000 | 700 | |||||
| 1000 | 0.6 | 8240 | 8240 | 830 | |||||
| 1250 | 0.5 | 9600 | 9600 | 970 | |||||
| 1600 | 0.5 | 11600 | 11600 | 1170 | |||||
Detail Pictures
Frequently Asked Questions
Q
What are the advantages of using high magnetic flux oriented silicon steel sheets in the S22-M transformer?
The use of high magnetic permeability oriented silicon steel sheets increases magnetic permeability by more than 15% and reduces iron loss by 20%–30% compared to traditional silicon steel sheets. The special grain orientation optimization process makes magnetic domains more orderly, significantly reducing hysteresis loss and eddy current loss during alternating magnetic field operation.
Q
Why does the S22-M transformer use environmentally friendly insulating oil instead of traditional mineral oil?
The S22-M transformer uses natural ester or synthetic ester insulating oil, which is fully biodegradable. Unlike traditional mineral insulating oil, it poses no risk of soil or water contamination in the event of a leak, making it a safer and more sustainable choice aligned with green power development standards.
Q
What is the rated capacity range available for the S22-M transformer?
The S22-M transformer is available in a wide range of rated capacities from 30 KVA up to 1600 KVA, supporting various high-voltage input configurations of 10 kV, 6.3 kV, and 6 kV, with a standard low-voltage output of 0.4 kV.
Q
How does the full inclined joint stacking process improve transformer performance?
The full inclined joint stacking process reduces magnetic resistance at the core joint by more than 60% compared to the traditional direct joint method. This effectively minimizes leakage magnetic loss and operational noise. The lamination gap is precisely controlled within 0.05mm, ensuring uniform magnetic permeability throughout the core.
Q
What structural materials are used to ensure the mechanical durability of the S22-M transformer?
The oil tanks, clamps, and other structural components are manufactured from high-strength cold-rolled steel plates processed via CNC stamping and welding. With a yield strength exceeding 345 MPa, these components offer 40% greater anti-deformation capability than ordinary steel, ensuring reliable protection during transportation and installation.
Q
What connection group labels and tapping ranges are supported by the S22-M transformer?
The S22-M transformer supports connection group labels Yyn0 and Dyn11. The tapping range options are ±5% and ±2×2.5%, offering flexible voltage adjustment to accommodate varying grid and load conditions on site.